Explanation
Welcome to The Circuit City
Charges in motion run your phone, your lights and your fan. In Circuit City, you'll see what pushes current, what resists it, how to simplify any network and how meters are made from a single galvanometer.
I = q/t = neAv(d)
Current is charge per second. Inside a wire, electrons drift slowly, millimetres per second, but the signal moves almost at light speed.
I equals n e A v d.
I = q/t = neAv(d)
Ohm's law V = IR · R = ρl/A
Ohm's law: voltage equals current times resistance. Resistance grows with length and falls with area: rho l over A.
Rho, the resistivity, depends only on the material and temperature.
Ohm's law V = IR · R = ρl/A
Stretch to n times length
Stretch a wire to twice its length: it gets longer and thinner at the same time. Resistance becomes four times.
In general, n squared.
Stretch to n times length → R × n²
Series
In series, resistances add and the same current flows. In parallel, reciprocals add and the same voltage appears.
Three and six ohms in parallel give two ohms.
Series: R = R₁ + R₂ · Parallel: 1/R = 1/R₁ + 1/R₂
Real cell
A real cell has internal resistance. Current is EMF over total resistance, and the voltage at the terminals is EMF minus I r.
Real cell: I = E/(R + r) · terminal voltage V = E − Ir
P = VI = I²R = V²/R · 1 kWh = 3.6 × 10⁶ J
Electrical power: V I, or I squared R, or V squared over R. Your bill counts kilowatt-hours: one is three point six million joules.
P = VI = I²R = V²/R · 1 kWh = 3.6 × 10⁶ J
Worked example
60 W and 100 W bulbs (both 220 V) in series. R(60) = 220²/60 ≈ 807 Ω, R(100) = 484 Ω.
Same current, so P = I²R: the 60 W bulb (larger R) glows brighter.