Explanation
V = kq/r (scalar) · W = qΔV · 1 eV = 1.6 × 10⁻¹⁹ J
Potential is energy per unit charge, k q over r. It's a scalar, so potentials from many charges just add.
Moving charge q through a potential difference does work q times delta V.
V = kq/r (scalar) · W = qΔV · 1 eV = 1.6 × 10⁻¹⁹ J
E = −dV/dr · equipotential surfaces ⟂ field lines
The field points down the potential hill: E is minus d V by d r. Surfaces of equal potential are always perpendicular to field lines, and no work is done moving along them.
E = −dV/dr · equipotential surfaces ⟂ field lines
C = Q/V · parallel plate C = ε₀A/d · with…
A capacitor stores charge. Its capacitance is charge per volt.
For two parallel plates, epsilon nought A over d. Slide in a dielectric and C rises K times.
C = Q/V · parallel plate C = ε₀A/d · with dielectric C = Kε₀A/d
Series
Capacitors combine the opposite way to resistors. In parallel, they simply add.
In series, add the reciprocals.
Series: 1/C = 1/C₁ + 1/C₂ · Parallel: C = C₁ + C₂
Energy U = ½CV² = Q²/2C = ½QV
A charged capacitor stores energy: half C V squared. That's what fires a camera flash.
Energy U = ½CV² = Q²/2C = ½QV
Dielectric inserted
Insert a dielectric. If the battery stays connected, the voltage is fixed and the charge rises K times.
If the battery was removed, the charge is fixed and the voltage drops K times.
Dielectric inserted: battery connected → V fixed, Q × K · battery removed → Q fixed, V ÷ K
Worked example
Three 3 μF capacitors: in series, 1/C = 1/3 × 3 = 1 → C = 1 μF. In parallel, C = 9 μF.