Explanation
Junction rule
At any junction, current in equals current out. Charge can't pile up at a point.
Junction rule: Σ I(in) = Σ I(out) (charge conservation)
Loop rule
Go round any closed loop and add up every rise and drop in voltage. The total is zero, because you end where you started.
Loop rule: Σ ΔV = 0 round any closed loop (energy conservation)
Balanced bridge
In a Wheatstone bridge, when P over Q equals R over S, the middle arm carries no current. You can then remove it to simplify the circuit.
Balanced bridge: P/Q = R/S → no current in the galvanometer
N cells in series
Cells in series add their EMFs and their internal resistances. Identical cells in parallel keep the same EMF but share the internal resistance.
n cells in series: E(total) = nE, r(total) = nr · m in parallel: E, r/m
Ammeter = galvanometer + small shunt S in parallel
To measure large currents, put a tiny resistance in parallel with a galvanometer. Most current bypasses through this shunt.
An ammeter has very low resistance.
Ammeter = galvanometer + small shunt S in parallel: S = I(g)G / (I − I(g))
Voltmeter = galvanometer + large R in series
To measure voltage, put a large resistance in series. A voltmeter has very high resistance, so it barely disturbs the circuit.
Voltmeter = galvanometer + large R in series: R = V/I(g) − G
Worked example
A 12 V cell drives 2 Ω and 4 Ω in one loop. Loop rule: 12 − 2I − 4I = 0 → I = 2 A.
Voltage across 4 Ω = 8 V.