Explanation
When carbon can't do it
Very reactive metals like sodium, magnesium and aluminium form such stable oxides that carbon can't reduce them at any practical temperature.
So electricity does the job instead.
Linking ΔG and E
ΔG° equals minus n F E°.
A positive E° means a negative ΔG°: the reaction goes on its own. More reactive metals have very negative reduction potentials, so they need a big push from outside.
Hall–Héroult process
Pure alumina is mixed with cryolite, Na₃AlF₆, or calcium fluoride. This lowers the melting point and improves conductivity.
It's electrolysed in a steel tank lined with carbon, which is the cathode. Graphite rods are the anode.
Trap: the anode burns away
The oxygen produced at the anode reacts with the graphite to make CO and CO₂.
So the anodes are slowly eaten away and must be replaced from time to time.
Anode: C + O²⁻ → CO + 2e⁻ · C + 2O²⁻ → CO₂ + 4e⁻
Copper from low-grade ores
Low-grade copper ores and scrap are leached with acid or bacteria, giving a solution of Cu²⁺ ions.
The copper is then recovered with scrap iron or with hydrogen.
Or: Cu²⁺ + Fe → Cu + Fe²⁺
Extraction by oxidation: chlorine
Non-metals like chlorine are extracted by oxidation.
Electrolysing brine gives chlorine. ΔG° is plus 422 kilojoules and E° is minus 2.2 volts, so you need more than 2.2 volts from outside.
Sodium hydroxide and hydrogen are by-products.
Molten NaCl (Downs cell) gives Na metal + Cl₂.
Gold by oxidation and reduction
In the cyanide process, gold is first oxidised by air into [Au(CN)₂]⁻.
Then zinc reduces it back to the metal. Extraction can use both oxidation and reduction.