Explanation
Young's modulus (Searle's)
To find Young's modulus, hang loads on a long wire and measure the tiny extension. Y equals M g L over pi r squared delta L.
A graph of extension against load averages all your readings into one slope.
Young's modulus (Searle's): Y = MgL / (πr²ΔL); use the slope of the load–extension graph
Surface tension by capillary rise
For surface tension, measure how high water climbs in a thin tube and the tube's radius. With a contact angle near zero, S equals r h rho g over two.
Surface tension by capillary rise: S = rhρg/2 (θ ≈ 0)
Viscosity by terminal velocity
For viscosity, drop small steel balls into glycerine and time them between two marks once they've reached a steady speed. Put that terminal velocity into Stokes' formula.
Viscosity by terminal velocity: η = 2r²(ρ − σ)g / 9v(t)
Resonance tube
A resonance tube is a closed pipe. Sound comes back loud at a quarter wavelength and again at three quarters.
The difference of the two lengths is half a wavelength, and it cancels the unknown end correction.
Resonance tube: l₁ + e = λ/4, l₂ + e = 3λ/4 → v = 2f(l₂ − l₁); e = (l₂ − 3l₁)/2
Ohm's law (V–I slope = R) · specific heat (method…
The rest follow the same pattern. Ohm's law: plot V against I, the slope is R.
Specific heat: heat lost equals heat gained. Focal length: measure u and v, then use the lens or mirror formula.
Ohm's law (V–I slope = R) · specific heat (method of mixtures) · lens and mirror focal length (u–v method)
Worked example
Resonances at 16 cm and 50 cm: λ/2 = 34 cm. End correction e = (l₂ − 3l₁)/2 = (50 − 48)/2 = 1 cm.
Check: l₁ + e = 17 cm = λ/4 ✓.