Explanation
Welcome to The Practical Lab
JEE Main lists a set of practicals, and examiners love asking how you'd read an instrument or what a graph's slope gives. In the Practical Lab, you'll read verniers and screw gauges, correct zero errors, and see what each standard experiment measures and how.
Vernier
A vernier's sliding scale is slightly shorter than the main scale. The least count is the difference of one division of each.
Read the main scale just before the vernier zero, then add the number of the line that matches, times the least count.
Vernier: LC = 1 MSD − 1 VSD · reading = MSR + (coinciding division × LC)
Zero error
Close the jaws first. If the vernier zero sits to the right of the main zero, every reading is too big: a positive zero error, which you subtract.
If it sits to the left, the error is negative, so subtracting it adds its size.
Zero error: positive if the vernier zero is right of the main zero; corrected = reading − zero error
Screw gauge
A screw gauge moves one pitch per turn. Divide the pitch by the number of circular divisions and you get the least count, often one hundredth of a millimetre.
Read the main scale, then add the circular scale reading times the least count.
Screw gauge: LC = pitch / circular divisions · reading = MSR + (CSR × LC)
Pendulum
For g, time twenty swings and divide, to cut the reaction-time error. Plot T squared against length: a straight line through the origin, with slope four pi squared over g.
Pendulum: time 20 swings; plot T² against l → straight line, slope 4π²/g
Least counts
Choose the tool for the job. A metre rule reads to a millimetre, a vernier to a tenth of one, and a screw gauge to a hundredth.
Look straight at the scale to avoid parallax.
Least counts: metre rule 1 mm · vernier 0.1 mm · screw gauge 0.01 mm
Worked example
A vernier (LC = 0. 01 cm) shows 2.
4 cm on the main scale, and its 7th line coincides. Reading = 2.
4 + 7 × 0. 01 = 2.
47 cm. With a zero error of +0.
02 cm, the true length is 2. 45 cm.