Explanation
Zeroth law
If two bodies are each in balance with a third, they're in balance with each other: that's why thermometers work. The first law is energy bookkeeping: heat given to a gas raises its internal energy and lets it do work.
Zeroth law → temperature · First law: Q = ΔU + W
Work = area under the P–V curve
On a pressure–volume graph, the work done by the gas is the area under its path. Going round a cycle, the net work is the area enclosed by the loop.
Work = area under the P–V curve; W = PΔV at constant P; cycle → enclosed area
Isothermal ΔU = 0 · isobaric W = PΔV · isochoric…
Keep the temperature fixed and the internal energy can't change, so all the heat becomes work. Keep the volume fixed and there's no work at all: all the heat goes into internal energy.
Isothermal ΔU = 0 · isobaric W = PΔV · isochoric W = 0
Adiabatic
Insulate the gas, or do it fast, and no heat crosses the wall: that's adiabatic. Now PV to the gamma is constant, and its curve is steeper than the isothermal one.
Pump a tyre fast and the pump gets hot.
Adiabatic: Q = 0, PV^γ = constant, steeper than the isotherm
Cp − Cv = R · γ = Cp/Cv
Heating at constant pressure takes more heat than at constant volume, because the gas also does work. The difference is R per mole.
Their ratio gamma is five thirds for a monatomic gas and seven fifths for a diatomic one.
Cp − Cv = R · γ = Cp/Cv: 5/3 monatomic, 7/5 diatomic
Worked example
A gas expands at a constant 10⁵ Pa from 0. 01 m³ to 0.
03 m³. W = PΔV = 10⁵ × 0.
02 = 2000 J. If it absorbed 5000 J, ΔU = 5000 − 2000 = 3000 J.