Explanation
Welcome to The Pressure Docks
Solids stretch, liquids push, and air lifts planes. At the Pressure Docks, you'll measure how much a wire stretches, why a ship floats, how a hydraulic lift multiplies force, and why a fast stream has low pressure.
Every law here is a short formula with a big payoff in the exam.
Stress = F/A (Pa) · Strain = ΔL/L (no unit)
Pull a wire and every square metre of it carries some force: that's stress, force over area. The wire stretches by a fraction of its length: that's strain, and it has no unit.
Stress = F/A (Pa) · Strain = ΔL/L (no unit)
Hooke's law
Up to the elastic limit, stress is proportional to strain. Their ratio is Young's modulus.
Steel has a huge Y, so it hardly stretches; rubber has a tiny one.
Hooke's law: stress ∝ strain → Y = stress / strain
Stress–strain curve
Keep loading and the straight line bends. Past the yield point the wire flows and won't spring back.
At the ultimate strength it necks, and then it snaps. Ductile metals have a long stretch before breaking; brittle ones snap early.
Stress–strain curve: proportional limit → yield point → ultimate strength → fracture
Young's (length), bulk B = −p/(ΔV/V) (volume),…
Three moduli for three kinds of change. Young's modulus for length, bulk modulus for volume, and shear modulus for shape.
Liquids and gases have only a bulk modulus. One over B is the compressibility.
Young's (length), bulk B = −p/(ΔV/V) (volume), shear G (shape)
U = ½ F ΔL = ½ × stress × strain × volume
A stretched wire stores energy, like a spring. It's half the load times the extension, or per unit volume, half stress times strain.
U = ½ F ΔL = ½ × stress × strain × volume
Worked example
A wire 1 m long with area 2 mm² stretches 0. 5 mm under 100 N.
Stress = 100 / (2 × 10⁻⁶) = 5 × 10⁷ Pa. Strain = 0.
5 × 10⁻³ / 1 = 5 × 10⁻⁴. Y = 5 × 10⁷ / 5 × 10⁻⁴ = 10¹¹ Pa.