Explanation
Welcome to The Polymer Mill
Plastic bags, nylon ropes, car tyres and non-stick pans are all giant molecules built from small repeating units. In the Polymer Mill, you'll sort polymers by how they're made and how strongly their chains hold together, and match each one to its monomer.
This chapter has left the current JEE Main syllabus, but polymer questions still turn up in older papers and board exams.
Polymer = very large molecule of repeating units…
A polymer is a giant molecule made of the same small unit repeated thousands of times. The small unit is the monomer.
If only one kind of monomer is used, it's a homopolymer, like polythene. If two or more kinds join, it's a copolymer, like Buna-S.
Polymer = very large molecule of repeating units · monomer = the small unit · homopolymer: one monomer (polythene) · copolymer: two or more monomers (Buna-S)
By source
Sort polymers by where they come from: natural ones from plants and animals, semi-synthetic ones made by treating natural polymers, like rayon from cellulose, and fully synthetic ones from a factory. Sort them by shape too: straight chains, branched chains, or a cross-linked network.
By source: natural (starch, cellulose, proteins, natural rubber) · semi-synthetic (cellulose acetate, i.e. rayon; cellulose nitrate) · synthetic (polythene, PVC, nylon) · By structure: linear (HDPE, PVC) · branched (LDPE) · cross-linked network (Bakelite, melamine)
By intermolecular forces (weakest
How hard do the chains hold each other? Elastomers hold weakly, so they stretch and snap back.
Thermoplastics hold a little more and soften on heating, so they can be remoulded. Fibres hold strongly through hydrogen bonds.
Thermosetting polymers form permanent cross-links when heated and can never be remoulded.
By intermolecular forces (weakest → strongest): elastomers (natural rubber, Buna-S, neoprene) · thermoplastics (polythene, PVC, polystyrene) · fibres (nylon-6,6, terylene: H-bonds) · Thermosetting (Bakelite, urea–formaldehyde): heat makes permanent cross-links
Addition (chain-growth) polymerisation
In addition polymerisation, monomers with a double bond simply add to the end of a growing chain, and nothing is lost. A radical from benzoyl peroxide starts the chain, each step adds one monomer, and two radicals meeting end it.
Very high pressure gives branched, low-density polythene. A Ziegler–Natta catalyst gives straight, high-density polythene.
Addition (chain-growth) polymerisation: monomers with C=C · no by-product · free-radical chain: initiation (benzoyl peroxide) → propagation → termination · LDPE: 1000–2000 atm, 350–570 K, trace of O₂ or peroxide (branched) · HDPE: Ziegler–Natta catalyst, TiCl₄ + Al(C₂H₅)₃, 333–343 K, 6–7 atm (linear)
Predict
Every addition polymer is its monomer with the double bond opened up. Polythene comes from ethene, PVC from vinyl chloride, polystyrene from styrene and Orlon from acrylonitrile.
So what makes Teflon?
Tetrafluoroethene, CF₂=CF₂.
Predict: the monomer of Teflon? · polythene ← CH₂=CH₂ · PVC ← CH₂=CHCl · polystyrene ← C₆H₅CH=CH₂ · polyacrylonitrile (Orlon, acrilan) ← CH₂=CHCN · Teflon ← ?
LDPE = free radicals at very high pressure,…
Trap! Low-density polythene is the branched one, made by free radicals at enormous pressure.
High-density polythene is the straight one, made with a Ziegler–Natta catalyst at low pressure. The names describe density, not pressure.
Trap card: LDPE = free radicals at very high pressure, branched, soft · HDPE = Ziegler–Natta catalyst, low pressure, linear, hard · don't swap the conditions
Worked example
Is PVC an addition or a condensation polymer? Its monomer, CH₂=CHCl, has a C=C and nothing is lost when the chains grow, so PVC is an addition polymer.
Its chains soften on heating, so it is also a thermoplastic.